Table of Contents
Advertisement
Is this player connected to an amplifier
(receiver) ? Select the type of jack you
are using.
YES
NO
9
Press X/x to select the type of jack
(if any) you are using to connect to
an amplifier (receiver), then press
ENTER.
Choose the item that matches the audio
connection you selected on pages 21 to
24 (
through
A
A
• If you connect just a TV and nothing
else, select "NO." Quick Setup is
finished and connections are complete.
B-1
C-1
• Select "LINE OUTPUT L/R
(AUDIO)." Quick Setup is finished and
connections are complete.
B-2
C-2
• Select "DIGITAL OUTPUT." The Setup
Display for "DOLBY DIGITAL" appears.
10
Press X/x to select the type of
Dolby Digital signal you wish to
send to your amplifier (receiver).
Choose the signal that matches the audio
connection you selected on pages 22 to
24 (
B
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DOWNMIX:
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
DTS:
B-2
C-2
• D-PCM (page 70)
D
• DOLBY DIGITAL (only if the
amplifier (receiver) has a Dolby Digital
decoder) (page 70)
26
LINE OUTPUT L/R (AUDIO)
DIGITAL OUTPUT
).
D
D
through
).
D
STANDARD
DOLBY SURROUND
D-PCM
D-PCM
DOLBY DIGITAL
11
Press ENTER.
"DTS" is selected.
12
Press X/x to select whether or
not you wish to send a DTS signal
to your amplifier (receiver).
Choose the item that matches the audio
connection you selected on pages 22 to
24 (
B-2
• OFF (page 70)
D
• ON (only if the amplifier (receiver) has
a DTS decoder) (page 70)
13
Press ENTER.
Quick Setup is finished. All connections
and setup operations are complete.
If your AV amplifier (receiver) has an
MPEG audio decoder, adjust the
"MPEG" setting (page 70).
Enjoying the surround sound
effects
To enjoy the surround sound effects of this
player or your amplifier (receiver), set the
OFF
following items as described below for the
audio connection you selected on pages 22 to
ON
24 (
B
default setting and does not need to be adjusted
when you first connect the player. Refer to
page 64 for using the Setup Display.
Audio Connection (pages 21 to 24)
A
• No additional settings are needed.
B-1
• Set "DOWNMIX" to "DOLBY
SURROUND" (page 69)
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DOWNMIX:
DOLBY SURROUND
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
DTS:
through
B
D
C-2
through
). Each of these is the
D
C-1
OFF
STANDARD
ON
D-PCM
PCM
OFF
OFF
ON
).
Advertisement
Table of Contents
