Turning On Your Phone - Motorola K1C Motomanual

Tip: You can safely leave the charger
connected to the phone after charging is
complete. This will not damage the battery.
When you charge the battery, the battery level
indicator in the upper right corner of the
display shows how much of the charging
process is complete. At least 1 segment of
the battery level indicator must be visible to
ensure full phone functionality while charging.
Charging from a Computer
You can charge your battery by connecting a
cable from your phone's mini-USB port to a
high-power USB port on a computer (not a
low-power one such as the USB port on your
keyboard or bus-powered USB hub). Typically,
USB high-power ports are located directly on
your computer.
Both your phone and the computer must be
turned on, and your computer must have the
correct software drivers installed. Cables and
software drivers are available in
MotorolaOriginal data kits, sold separately.

Turning On Your Phone

1 Open your phone.
2 Press and hold the
power key for 3
seconds.
The phone may
require several
seconds to power on.
3 If necessary, enter your 4-digit unlock
code (the last 4 digits of your phone
number) and press OK to unlock the
phone.
Getting Started 9