Listening To The Radio - Sony DAV-SR2 Operating Instructions Manual

5
Press ENTER.
A preset number appears in the front panel
display.
6
Press C/c/ x X
/ to select/ the preset
number you want.
7
Press ENTER.
The station is stored.
m
8
Repeat 1 to 7 to store other stations.
To change the preset number
Restart from step 1.
To change the AM tuning interval
The AM tuning interval can be set to either
10 kHz (default) or 9 kHz (for some areas).
To change the AM tuning interval, first tune in
any AM station, then turn off the system by
pressing "/1 on the remote, or "/1 on the
system. While holding down VOLUME + on the
system, press "/1 on the system to turn on the
power. If you change the interval, AM preset
stations will be erased.
To reset the interval, repeat the same procedure.

Listening to the Radio

Preset radio stations in the system's memory
first (see "Presetting Radio Stations" on
ST
page 66).
DISPLAY
ST
ST
MHz
1
2
3
To turn off the radio
Press "/1.
TUNER/
BAND
PRESET
–/+
With cover opened.
Press FUNCTION repeatedly until "FM"
or "AM" appears in the front panel
display.
The last received station is tuned in.
Press PRESET + or – repeatedly to
select the preset station you want.
Each time you press the button, the system
tunes in one preset station.
Each time you press TUNER/BAND, the
band toggles between AM and FM.
Adjust the volume by pressing
VOL +/–.
"/1
FUNCTION
TUNING –/+
x
VOL +/–
FM MODE
ST
MHz
continued
67 GB