2
3
4
1. Overlay Label with Pin Orientation Guides
2. Combicon Jack
3.
Connect the wiring to the appropriate screw terminals.
4.
Use the provided USB cable to connect the NI USB-6501 device to your computer.
Features
The NI USB-6501 features USB cable strain relief, an LED indicator, and two screw terminal
connector plugs for I/O.
USB Cable Strain Relief
You can provide strain relief for the USB cable by threading a zip tie through the USB cable
strain relief ring and tightening it around a looped USB cable, as shown in the following
figure.
Figure 3. Signal Name Label Application
1
3
3. Screw Terminal Connector Plugs
4. Signal Name Labels
NI USB-6501 User Guide | © National Instruments | 5
4