Table of Contents
Advertisement
Symptom
Check item
Even though
• Are you printing in
[Borderless] for
[Borders] is
selected in the
Print Settings, the
image is printed
with borders on
both sides.
The whole area of
• Did you set [Border 1] in the
an image cannot
be printed.
The image is
• Is the paper tray inserted
printed at an angle.
There are white
lines or dots on the
printed pictures.
The picture is too
bright, dark,
reddish, yellowish,
or greenish.
Settings
Symptom
Check
The [Borderless]
• Are you operating the
and [Border 1/2]
setting does not
take effect.
Connecting with a computer
Symptom
Check item
The images on the
memory card
inserted to this unit
are not displayed
on the computer.
slideshow mode?
—
Print Settings?
properly?
—
—
CreativePrint menu?
—
Cause/Solutions
c When printing in slideshow mode, the
layout of the LCD screen is printed as it
appears, so the Borderless Print setting is
invalid.
c When you use a device other than this unit
to edit or save an image, blank areas
around an image are also saved as part of
image data. Even if you print such data
with the Borderless setting, you cannot
eliminate the borders on both sides of a
print. (.page 65)
c You can print the whole area of an image
by selecting [Border 1] in the Print
Settings. (.page 65)
c Re-insert the paper tray firmly straight in
to the end.
c The print head or paper path may be
soiled. Use the supplied cleaning cartridge
and sheet to clean the head and path.
(.page 98)
c Adjust the image quality on the image
quality adjustment screen.
Adjusting the image quality is only
available in the CreativePrint menu. For
details, see page 59.
Cause/Solutions
c In the CreativePrint menu, templates are
used and you cannot select border/
borderless prints.
Cause/Solutions
c This unit does not provide the function for
viewing the memory card images from the
computer.
Continued
93
GB
Advertisement
Table of Contents
