Toyota Tacoma 2019 Quick Reference Manual page 34

TOYOTA SAFETY SENSE
PCS PEDESTRIAN DETECTION
Under certain conditions, the PCS system included with the TSS-P package may
also help to detect a pedestrian in front of your vehicle using the in-vehicle camera
and front-grill mounted millimeter wave radar. The in-vehicle camera of PCS
detects a potential pedestrian based on size, profile, and motion of the detected
pedestrian. However, a pedestrian may not be detected depending on the
conditions, including the surrounding brightness and the motion, posture, size, and
angle of the potential detected pedestrian, preventing the system from operating or
engaging.
As part of the Pre-Collision System, this function is also designed to first provide an
alert and then automatic braking if needed.
Refer to a Toyota Owner's Manual for additional limitations and information.
CHANGING PCS ALERT TIMING
(1) Press " " switches and select
(2) Press " " switches and select "PCS" and then press "
(3) Press " " switches and select "Sensitivity" and then press "
desired setting.
(4) Press " " to go back to the menu. Also, use "
top screen.
Note: PCS is enabled each time the engine switch is turned to Ignition On.
The system can be disabled/enabled and the alert timing of the system can be
changed. (Alert timing only, brake operation remains the same).
™
Monocular camera sensor
32
Middle
(default)
Far
from the Multi-Information Display (MID).
" to switch menus or display
Millimeter
wave radar
Near
".
" to select the