Page 1
Lots 03 (VHF) and Lots 04 (UHF) and later. * Both lines go to pin #6. This will allow the VXR-1000 to power on and off automatically when the radio is powered on and off. See Section III for an alternate installation.
Page 2
Other programming and setup of the VXR-1000, the associated portable radio, and the connected mobile radio are required. These If the mobile radio is to be used while the VXR-1000 is powered-off, connect pins 8 and 9 as described in must be accomplished by a knowledgeable installer/technician consistent with the equipment’s capabilities and the end user’s...