Adjusting The Color Tones (White Balance); Adjusting The White Balance To Suit A Specific Light Source (Auto/Preset White Balance) - Sony DSLR-A300/A350 Instruction Manual

Adjusting the color tones (White balance)

The color tone of the subject changes depending on the characteristics of
the light source. The table below shows how the color tone changes based
on various light sources, compared with a subject that appears white under
the sunlight.
Weather/
lighting
Characteristics
of light
White balance is a feature that adjusts the color tone to approximate what
you see. Use this feature when the color tone of the image did not come out
as you expected, or when you want to change the color tone on purpose for
photographic expression.
Note
• If the only light source available is a mercury lamp or a sodium lamp, the camera
will not be able to acquire the accurate white balance because of the characteristics
of the light source. Use the flash in such cases.
Adjusting the white balance to suit a specific light source
(Auto/Preset white balance)
Fn button t [White balance] t Select the desired setting
• When [AWB] is not selected, you can finely adjust the color tone with b/
B on the controller. Adjusting it toward + turns the image reddish and
adjusting it toward – turns the image bluish.
Daylight Cloudy
White Bluish
Fluorescent Incandescent
Green-tinged Reddish
91