Connect The Camera To A Wireless Network; Configure The Wireless Network Manually; Find The Device On The Network - Axis M3045-WV User Manual

AXIS M3045-WV Network Camera

Connect the camera to a wireless network

Connect the camera to a wireless network
1. Press and very quickly release the WLAN pairing button on the camera.
2. Press the WLAN pairing button on the wireless access point within 120 seconds from pushing the button on the camera.
3. Make sure the LED indicator shows steady green for 10 seconds, this means that the camera is connected.
4. Go to Settings > System > Wireless and turn the WLAN pairing button off to prevent unauthorized WLAN pairing.
If the wireless access point does not support push-button configuration, you have to configure the wireless network manually, see
Configure the wireless network manually on page 4 .

Configure the wireless network manually

1. Use a network cable to connect the camera to the network.
2. Make sure the access point is up and running.
3. Log in to the product's webpages, see Find the device on the network on page 4 .
4. Go to Settings > System > Wireless.
5. In the list, select the wireless network or go to Add another network and add it manually with the SSID.
6. Enter the password for the access point.
7. Click Save.
8. Disconnect the network cable from the camera.
9. Make sure the LED indicator shows steady green for 10 seconds, this means that the camera is connected.
If the network is set up with another security method than WPA2-PSK, see Advanced wireless settings on page 13.

Find the device on the network

To find Axis devices on the network and assign them IP addresses in Windows®, use AXIS IP Utility or AXIS Device Manager. Both
applications are free and can be downloaded from axis.com/support
For more information about how to find and assign IP addresses, see the document How to assign an IP address and access your
device on the device page at axis.com
Access the device
1. Open a browser and enter the IP address or host name of the Axis device.
If you have a Mac computer (OS X), go to Safari, click on Bonjour and select the device from the drop-down list. To add
Bonjour as a browser bookmark, go to Safari > Preferences.
If you do not know the IP address, use AXIS IP Utility or AXIS Device Manager to find the device on the network.
2. Enter the username and password. If you access the device for the first time, you must set the root password. See
Set a secure password for the root account on page 5 .
3. The live view page opens in your browser.
4