Index - IBM Selectric Reference Manual

Magnet Link 8. J
Wrong Hole 2. J 3
See SH 8.4
No
Yes
Release Lug 6.4
Bind In Release Lever
Ru:st On Com
No
• Figure 7.0
INDEX
7.0 Inde>: Adjustments
7.1
7.2
7.3
7.4
With the Index Cam on high point the stop should
clear the Index Pawl by .005".
The detent should not move the platen when re-
moved and re-inserted when cam is on high point.
Check for broken we Id at rear.
S. H. IMPROVED RH PLATEN BUSHING
INDEX
Link Off
Follower Broken
Spring Off Index
Pawl
7.5
A new R. H. platen bushing has been released to the
5-11
Yes
Not Enough
Link Adj. 7.2
Com Follower Broken 7.3
Binds in Platen 7.4
Heavy Forms or
Form Feed Devices 7.5
Assembly Line which wi II eliminate the wear prob-
lem which previously existed in this area. The PN
of the new platen bushi ng wi II be the same as the
old one, PN 1128523. A new grip ring must be
used to secure the new style RH platen bushing.
The grip ring part number is 311072.
S.H. HEAVY FORMS W/FORMS FEED DEVICES
A specia I index lever and operati ona I shaft stabi li-
zer are available for use in high torque applications.
Use B/M 1272719.