Kärcher SGV 6/5 Service Manual page 32

1 Turbine cover
2 Screws
 Unscrew the screws.
 Remove turbine cover.
 Remove the suction turbine from the appliance.
 Separate the electric connectors.
 Take the connection calbe through the turbine cover.
 Remove the seals and sealing cone from the suction
turbine.
1 Screws
2 Grid supply air
 Unscrew the screws.
 Remove the supply air grid from the appliance.
Note
A connecting piece of the waste water tank is located be-
hind it.
 Remove present soiling.
1 Seal suction turbine
Centre
2 Suction turbine
3 Lower gasket
Installation information
Make sure the seals are aligned properly during installa-
tion.
32
English 5.906-590.0 Rev. 01 (05/17)