Ev: Adjusting The Light Intensity; Focus: Changing The Focus Method; Metering Mode: Selecting The Metering Mode - Sony DSC-T2 Cyber-shot&reg Handbook

Digital still camera
Hide thumbs Also See for DSC-T2 Cyber-shot®:
Table of Contents

Advertisement

Shooting menu
On the Burst
• When recording with the self timer, a series of a maximum of five images is recorded.
• The recording interval is approx. 0.51 seconds. The recording interval becomes longer, depending on the
setting for the image size.
• When the battery level is low, or when the internal memory or "Memory Stick Duo" is full, the Burst
stops.
• You may not be able to shoot images in the Burst mode depending on the Scene Selection mode (page 49).
On the Exposure Bracket
• The focus and white balance are adjusted for the first image, and these settings are also used for the other
images.
• When you adjust the exposure manually (page 34), the exposure is shifted based on the adjusted
brightness.
• The recording interval is approx. 0.51 seconds.
• If the subject is too bright or too dark, you may not be able to shoot properly with the selected bracket step
value.
• You may not be able to shoot images in the Exposure Bracket mode depending on the Scene Selection
mode (page 49).

EV: Adjusting the light intensity

Manually adjusts the exposure. This menu is the same as the item that you set by touching the
EV setting icon in

Focus: Changing the focus method

You can change the focus method. Use the menu when it is difficult to get the proper focus in
auto focus mode. This menu is the same as the item that you set by touching the Focus setting
icon in
mode. See page 31.

Metering Mode: Selecting the metering mode

Selects the metering mode that sets which part of the subject to measure to determine the
exposure. This menu is the same as the item that you set by touching the Metering Mode
setting icon in
52
mode. See page 34.
mode. See page 33.
For details on the operation 1 page 45

Advertisement

Table of Contents
loading

Table of Contents