Dpof: Adding A Print Order Mark; (Print): Printing Images Using A Printer - Sony CYBER-SHOT DSC-S750 Instruction Manual

Viewing menu For details on the operation 1 page 30
To cancel the protection
In single image mode
Press in step 3 or 4 of "To protect images in single image mode."
z
In index mode
1 Select the image for which you want to remove protection in step of "To protect images in
5
index mode."
2 Press z to turn the - indicator gray.
3 Repeat the operation above for all images to be unprotected.
4 Press MENU, select [OK] with B, and then press z.
To cancel protection of all images in the folder
Select [All In This Folder] in step 4 of "To protect images in index mode," and press z .
Select [Off] with B , then press z .
• Note that formatting the internal memory or "Memory Stick Duo" erases all the data stored on the
recording media, even if the images are protected, and these images cannot be restored.
• It may take some time to protect an image.

DPOF: Adding a Print order mark

Adds a (Print order) mark to images you want to print (page 81).

(Print): Printing images using a printer

Printing images shot with the camera.
See page 77.
44