Selecting Still Images To Print (Print) - Sony DSC-S75/S85 Operating Instructions Manual

7
When "CHANGE MEMORY
STICK" is displayed, eject the
"Memory Stick."
"INSERT MEMORY STICK"
appears.
8
Insert another "Memory
Stick."
"RECORDING" appears. When
copying is completed,
"COMPLETE" appears.
To end copying, select [EXIT]
with v/V, then press z.
To copy the image to
another "Memory Stick"
Select [CONTINUE] with v/V in step
8, press z, then repeat steps 7 and 8.
To cancel copying part-way
Select [CANCEL] with b/B in step 3
or [EXIT] with b/B in step 6, then
press z.
Notes
• If you do not select [EXIT] after
"COMPLETE" appears and instead insert
a new "Memory Stick," the same image is
copied again.
• You cannot copy uncompressed images.
• You cannot copy images that are bigger
than 5 MB at once. If "NOT ENOUGH
MEMORY" appears or
INDEX screen, cancel some images to
copy and try again.
76
flashes on the
Selecting still images
to print (PRINT)
Mode dial:
You can mark a print mark on still
images recorded with your camera.
This mark is convenient when you
have images printed at a shop that
conforms with the DPOF (Digital Print
Order Format) standard.
.
In single-image or triple-
image mode
2,4
3
1
Set the mode dial to
2
In single-image mode
Display the image you want to
print with b/B.
In triple-image mode
Press the zoom W button twice in
the single-image mode to turn to
the triple-image mode.
Display the image you want to
print with b/B.
3
Press MENU.
The menu appears.
4
Select [PRINT] with b/B in
single-image mode, or with
v/V in triple-image mode,
then press z.
The (print) mark is marked on
the displayed image (or the
middle-positioned image in triple-
image mode).
1
W
.