Bracket Mounting; Bb Stainless Steel U-Bolt For Pipe Fixing; Securing The Housing Cover In Flameproof Areas - ABB JDF200 Operating Instruction

6.5.1 5.4.1 Bracket mounting

Mounting bracket is available as standard please refer to the relevant installation drawing below in mm (inch.):
Figure 3: JDF200 field indicator installed on a horizontal or vertical pipe with optional bracket

6.5.2 5.4.2 BB Stainless steel U-bolt for pipe fixing

The U-bolt and nuts supplied are necessary for the installation
on pipe. In case of panel or wall installation, the U-bolt and the
U-bolt nuts and washers will not have to be used.
The bolts for panel mounting are not within the scope of
supply.
Figure 4: Pipe and wall mounting bracket kit (B2)
10 OI/JDF200-EN Rev. E | 2600T Series
121 (4.76)
91 (3.58)
107 (4.21)
130 (5.12)
100 (3.93)
26 (1.02)
55 (2.17)
6.6 5.5 Securing the housing cover in flameproof
areas
The front face of the field indicator housing features a locking
screw (hex-head socket screw) on the top right-end corner
(see picture 5).
— Install the cover on the housing by hand- tightening it.
— Turn the locking screw counterclockwise to secure the
housing cover. This involves unscrewing the screw until
Figure 5: Housing cover locking screws
5 Mounting