Shooting still images/movies
The screen does not turn on even when the power is turned on.
Turn on the screen (page 20).
•
Your camera cannot record images.
Check the free capacity of the internal memory or "Memory Stick Duo" (page 21). If they are
•
full, do one of the following:
Delete unnecessary images (t step 6 in "Read This First").
–
Change the "Memory Stick Duo".
–
You are using the "Memory Stick Duo" with the write-protect switch, and the switch is set to
•
the LOCK position. Set the switch to the recording position (page 90).
You cannot record images while charging the flash.
•
Set the mode switch to
•
Set the mode switch to
•
The image size is set to [640(Fine)] when recording movies. Do one of the following:
•
–
Set the image size to other than [640(Fine)].
Insert a "Memory Stick PRO Duo" (pages 21 and 90).
–
The subject is not visible on the screen.
Set the mode switch to an other position than
•
Recording takes a long time.
The NR slow shutter function is activated (page 17). This is not a malfunction.
•
The image is out of focus.
The subject is too close. Ensure the lens is farther from the subject than the minimum shooting
•
distance, approximately 12 cm (4 3/4 inches) (W) or 50 cm (19 3/4 inches) (T).
(Landscape mode) or
•
images.
Refer to "If the subject is out of focus" on page 30.
•
Zoom does not work.
•
You cannot change the zoom scale when shooting movies.
Precision digital zoom does not function.
Set [Digital Zoom] to [Precision] (page 43).
•
•
This function cannot be used while shooting movies.
when shooting still images.
when shooting movies.
(Twilight mode) is selected in the Scene mode when shooting still
(page 24).
77