Creating A User-Defined Look - Canon XC15 Instruction Manual

Using Looks
Options (for photos)
[ Standard]:
[ Portrait]:
72
[ Landscape]:
[ Neutral]:
[ Faithful]:
[ Monochrome]:
[ Sepia]:
[ Clear]:
[ Autumn Hues]:
{ User Setting 1],
[
{ User Setting 2]: Allows you to create a customized look. Start with one of the pre-installed looks and
[
Adjusting the Settings of a Pre-installed Look
1 Touch [ ].
2 Adjust the desired setting by touching [-] or [+].
• [Sharpness]:
1
[Contrast] :
2
[Color Depth] :
1
Not available for [
2
Not available for [
NOTES
• When using the [
to [i On] to display a more accurate looking image on the screen.
• When using the [

Creating a User-defined Look

You can create your user-defined looks based on one of the pre-installed looks. The camcorder can store two
user-defined looks for clips and two for photos.
1 Touch [FUNC.] and then touch
2 Select which user-defined setting icon to use.
v User Setting 1] or [
• Select [
{ User Setting 2] for photos.
[
3 Touch and then touch [Standard].
4 Select the look that will be the basis of the user-defined look.
5 Touch [Yes] and then touch [OK].
6 Adjust the settings as described in the previous section.
• The settings for [
7 Touch [X].
Table of Contents
Standard profile for general photo shooting situations.
Appropriate for taking photos of people, as this look brings out a sense of vitality in skin
tones.
Makes colors in the landscape appear more vivid.
The details of the subject are emphasized, which helps create an image that is suitable for
editing later.
Faithfully reproduces the colors of the subject.
Allows you to take a black & white photo.
Allows you to take a sepia-toned photo.
The contrast in the image is emphasized, making the subject clearer and stand out more.
Brings out the beauty of colors found in, for example, autumn foliage.
adjust the settings as necessary.
0 (low sharpness) to 7 (high sharpness)
-4 (low contrast) to +4 (high contrast)
-4 (shallower colors) to +4 (richer colors)
Production Camera], [
Neutral], [ Monochrome] and [
– Highlight Priority] look, you can set [ System Setup] > [1] > [– View Assistance]
– Highlight Priority] look, taking photos during
[Looks] (in
v User Setting 2] for clips and [
Canon Log] cannot be adjusted.
– Highlight Priority].
Wide DR] or [
Sepia].
mode) or
Menus
mode is not available.
[Looks] (in mode).
{ User Setting 1] or
Index