Speaker Assembly - HP EliteBook 840 G6 Maintenance And Service Manual

Speaker assembly

Table 6-7 Speaker assembly description and part number
Description
Speaker assembly (includes cable)
Before removing the speaker assembly, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Disconnect the battery cable from the system board (see
Remove the speaker assembly:
1. Disconnect the speaker cable from the system board (1), and then remove the cable from the clip (2).
2. Remove the two broadhead Phillips M2.0 × 2.0 screws (3) that secure the speaker to the computer.
3. Remove the speaker from the computer (4).
Reverse this procedure to install the speaker.
58 Chapter 6 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
Bottom cover on page 37).
Spare part number
L62736-001
37).
Battery on page 49).