Sorting With Nri 4-Fold Sorting Adapter (Option) - NRI v2 eagle Operating Instructions Manual

f
uncTion
5.6.1.1

Sorting with NRI 4-fold sorting adapter (option)

For the purpose of splitting-up and for better transport
of the sorted coins you have the option of an NRI 4-fold
sorting adapter (manifold) which can be screwed to the
coin validator from the bottom. This adapter is primarily
used in AWP and SWP slot machines.
If the sorting adapter is installed four sorting chutes are
available to you
Which coin is sorted into which of the up to four chutes is
determined by customized factory programming.
The following table shows which adapter (manifold) chute
corresponds to which coin validator chute:
Manifold chute v -eagle sorting chute
2
A
B
C
D
24
.
(cf. Chap. 10.3 Accessories, p. 40)
3
2
1
5
Fig. 6: Sorting chute A–D of
sorting adapter
BA_v2_eagle_BDTA_EN_1-4