Printing Images; Specifying Dpof - Sony 3-287-969-15 (1) Instruction Manual

Printing images

Specifying DPOF

Using the camera, you can specify the images and the number of images to
print before you print images at a shop or with your printer. Follow the
procedure below.
DPOF specifications are left with images after printing. It is recommended
that you unspecify them after printing.
Specifying /unspecifying DPOF on selected images
1
MENU button t
An image is displayed on the single screen.
2
Select the image with b/B on the controller.
3
Select the number of sheets with the
• To unspecify DPOF, set the number to "0."
4
Press the MENU button.
5
Select [OK] with v on the controller, then press the center of
the controller.
Notes
• You cannot specify DPOF on RAW data files.
• You can specify any number up to 9.
• If you unspecify DPOF, the index print is also canceled.
Specifying/unspecifying DPOF on all the images
MENU button t
[Cancel all] t [OK]
1 t [DPOF setup] t [Marked images]
1 t [DPOF setup] t [All images] or
/ buttons.
141