Wired Remote Controller - Toshiba RAV-SM564UT-K Owner's Manual

4-way Air Discharge Cassette Type
3

WIRED REMOTE CONTROLLER

This remote controller can control the operation of up to 8 indoor units.
Display section
In the display illustration below all the icons are shown. When the unit is in
operation, only relevant icons will be displayed.
• When turning on the leak breaker at the first time,
display part of the remote controller.
• While this icon is flashing, the model is being automatically confirmed.
Wait till display has disappeared to use the remote controller.
4
6
15
18
1
SETTING display
Displayed during setup of the timer or other
settings.
2
Operation mode
The selected operation mode is displayed.
3
Error display
Displayed while the protective device works or an
error occurs.
4
Timer display
When an error occurs, error code is displayed.
5
Timer mode display
The selected timer mode is displayed.
6
Filter display
Reminder to clean the air filter.
7
TEST run display
Displayed during a test run.
8
Louver position display
Displays louver position.
6-EN
1
2
3
5
flashes on the
7 8 9 16 17
14
9
Swing display
Displayed during up/down movement of the
louver.
10
Set temperature display
The selected set temperature is displayed.
11
Remote controller sensor display
Displayed while the sensor of the remote controller
is used.
12
Pre-heat display
Displayed when the heating mode is energized or
defrost cycle is initiated.
While this icon is displayed, the indoor fan stops.
13
No function display
Displayed when the function requested is not
available on that model.
– 31 –
Owner's Manual
TEMP. ON / OFF
TIMER SET FAN MODE
TIME SAVE VENT
FILTER
RESET TEST SET CL SWING/FIX UNIT LOUVER
19
10
11
12
13
Display
section
Operation
section