Table of Contents
Advertisement
5. If a name server is used in the local network, open the "Name Servers" tab.
The following dialog appears:
6. Enter the respective addresses in the text boxes.
7. Confirm your entries.
The dialog closes.
8. Close the "Network&Dial-Up Connections" window.
The Control Panel is displayed.
The HMI device is addressed in the local network.
4.9.4
Specifying the logon data
Use this function to enter the information for logging onto local networks.
Requirement
● You have opened the "Network ID" dialog box using the "Network ID" icon.
● Your system administrator has provided the necessary information for the setting.
Procedure
1. Enter your user name in the "User name" text box.
2. Enter your password in the "Password" text box.
3. Enter the name of your assigned domain in the "Domain" text box.
4. Confirm your entries.
The dialog closes.
The logon data has now been set.
Mobile Client900RXA
Operating Instructions, 07/2015, A5E36360099-AA
Parameter assignment of a Mobile Client
4.9 Configuring network operation
85
Advertisement
Table of Contents
