Adjusting the ADJUST options under PICTURE MODE
1
Press + or – to select the
desired item (e.g., COLOR),
then press ENTER.
2
Adjust the value according to the following table, then press ENTER.
For
PICTURE
COLOR
BRIGHT
HUE*
SHARP
* Y ou can adjust HUE for the NTSC color system only .
3
Repeat the above steps to adjust other items.
The adjusted settings will be received when you select PERSONAL.
Adjusting the ADJUST options under SOUND MODE
1
Press + or – to select the
desired item (e.g., BALANCE),
then press ENTER.
2
Adjust the value according to the following table, then press ENTER.
For
BASS
TREBLE
BALANCE
BBE
3
Repeat the above steps to adjust other items.
The adjusted settings will be received when you select PERSONAL.
Tip
• For details on the menu system and how to use the menu, r
Press – to
decrease pictur e contrast
decrease color intensity
darken the pictur e
increase r ed pictur e tones
soften the pictur e
Press – to
decrease the bass
decrease the tr eble
increase the left speaker 's volume
select "HIGH" for higher enhancement of sound clarity;
select "LOW" for lower enhancement of sound clarity;
select "OFF" to tur n of f the BBE sound
"Introducing the menu system" on page 14 and "How to use the menu"
on page 15.
ENTER
COLOR
Press + to
increase pictur e contrast
increase color intensity
brighten the pictur e
increase gr een pictur e tones
sharpen the pictur e
ENTER
BALANCE
Press + to
increase the bass
increase the tr eble
increase the right speaker's volume
Adjusting Your Setup (MENU)
80
00
efer to
17