Function; Comfort - Ford Mustang 2013 Quick Reference Manual

14/ 2013 mustan g / Quick RefeRence Guide
Rearview camera
This system provides a visual display of the area behind the vehicle. The
display automatically appears in the navigation screen (if equipped) when
the vehicle is in R (Reverse) and uses green, yellow and red guides to alert
you of your proximity to objects. For non-navigation vehicles, the image will
appear in the rearview mirror.
Reverse sensing system
This system sounds a warning tone if there is an obstacle near the vehicle's
rear bumper when the vehicle is in R (Reverse) and is traveling less than 3
mph (5 km/h). The warning tone will increase in frequency as the object
gets closer.
SelectShift Automatic
To enable, move the SelectShift gearshift lever from D (Drive) to S (Sport).
In (S) Sport Mode, a unique downshift schedule is utilized to keep the
MyKey :
®
transmission in lower gears for enhanced performance and more aggressive
MyKey allows you to program certain
engine braking. When the vehicle is in (S) Sport mode, manual gear
driving restrictions in order to promote
selection is enabled by using the thumb toggle on the side of the gearshift
good driving habits. You can program
lever. Press (+) to upshift, press (–) to downshift. Return the gearshift lever
things like: speed restrictions,
to (D) Drive when manual control is no longer desired.
limited volume levels and safety belt
reminders. For complete information,
refer to the MyKey chapter in your
Owner's Manual.
:
*
:
*
Note: Visibility aids do not replace the need to watch where the vehicle is moving.
Refer to your Owner's Manual for safety information, more detail and limitations.
transmission:
™ *
Note: Manual transmission vehicles are not SelectShift capable.

Function

Comfort

Heated front seats
The heated seat controls are located on the
instrument panel. Press
heated front seats.
Tilting head restraints
the head restraint forward for additional comfort by
gently pulling the top of the head restraint. Once it is
in the forward-most position, tilting it forward once
more will release it to the upright position.
Note: Do not attempt to force the head restraint
backward after it is tilted. Instead, continue tilting it
forward until the headrest releases to the upright position.
if equipped
*
2013 mustang /
: Accessing and adjusting gauge color,
*
ambient color, halo color and MyColor
to enable and disable
The information display screen allows you to select
specific colors to backlight your gauges (Gauge
color) the area around your gauges (Halo color) as
:
*
well as selecting ambient lighting options to appear
Your vehicle's front row in the footwell areas, cupholders and console
head restraints can be bin (Ambient color). To access. Press
adjusted. Pull up to raise repeatedly until the desired feature
the head restraint. To lower, COLOR, AMBIENT COLOR or HALO
press the head restraint appears in the display. Press
down while pressing and to scroll through all possible color options as well
holding the guide sleeve as Mycolor . Mycolor
®
adjust/release button. Tilt own color preference by adjusting the levels of the
three primary colors (blue, red and green). Vehicles
equipped with the 5-way control (located on the
steering wheel), use the arrows to scroll through
a menu and press the
lighting preferences. See the Information Displays
chapter of your Owner's Manual for information on
how to customize the colors of your vehicle.
Glass roof and roller blind sunshade
Use the center-mounted handle to slide the shade
open or closed.
Quick RefeRence Guide/1 5
:
®
SETUP
(GAUGE
COLOR)
RESET repeatedly
allows you to create your
®
OK button to select your
:
*
if equipped
*