Connecting A Dvd Player - Sony Trinitron KV-EF29 Operating Instructions Manual

Connecting a DVD player

(audio/video) connectors, connect ... 1 (video input) on your TV to
Using /
LINE OUT on your DVD player.
DVD player
LINE OUT
R-AUDIO-L VIDEO
Audio/Video cable
(not supplied)
Connecting a DVD player with component video output
connectors
1 Using audio connectors, connect L and R of
TV to the AUDIO L and R output connectors on your DVD player.
2 Using three yellow video cables, connect Y, B-Y, and R-Y of
input) on your TV to Y, B-Y, and R-Y output on your DVD player.
DVD player
COMPONENT VIDEO OUT S VIDEO OUT
R-Y B-Y Y
To audio
output
Video cable (not supplied)
To component
Notes
video output
• Some DVD player terminals may be labeled Y, Cb, and Cr. If so, connect Y
• Since the high quality pictures on a DVD disc contain a lot of information,
• Connect your DVD player directly to your TV. Connecting the DVD
LINE OUT
R-AUDIO-L
VIDEO
Audio cable
(not supplied)
(green) to Y, B-Y (blue) to Cb, and R-Y (red) to Cr.
picture noise may appear. In this case, adjust the sharpness ("SHARP") in
the VIDEO ADJUST menu. (see page 28.)
player through other video equipment will cause unwanted picture noise.
To ... 1, 2, or 3
(video input)
(yellow)
-L (MONO) (white)
-R (red)
(component video input) on your
R L Y B-Y R-Y
To
L (white)
R (red)
: Signal flow
(component video
To
(component
video input)
:Signal flow
Using Your New TV
7