Programming The Remote Control - Sony FD Trinitron WEGA KV-32XBR450 Operating Instructions Manual

Other Information

Programming the Remote Control

HOME THEATER CONTROL
50
The remote control is preset to operate Sony brand video equipment.
Sony
Equipment
Beta, ED Beta VCRs
8 mm VCR
VHS VCR
DVD Player
If you have video equipment other than Sony brand that you want to
control with the TV's remote control, use the following procedures to
program the remote control.
The equipment must have infrared (IR) remote capability in order to be used
with the remote control.
1
Check the list of the "Manufacturer's Codes" listed on page 52,
and find the three-digit code number for the manufacturer's code
for your equipment. (If more than one code number is listed, start
3
with the number listed first.)
2
2
Open the cover of the remote control and move the slide switch
to the desired equipment type.
3
Press CODE SET and close the cover of the remote control.
You must do step 4 within 10 seconds of step 3, or you must redo steps 2
and 3.
4
Enter the three-digit manufacturer's code number.
5
Press ENTER.
6
To check if the code number works, aim the TV's remote control
at the equipment and press the green POWER button that
corresponds with that equipment. If it responds, you are done. If
not, try using another code listed for that manufacturer.
4
5
Switch Position
on Remote Control
AV1
AV2
AV3
DVD
Programmable
Code Number
303
302
301
751