Specifications
Picture Tube
Antenna
Television System
Channel Coverage
Power Requirements
Inputs/Outputs
DVI-HDTV
Video (IN)
S Video (IN)
Audio (IN)
Component Video Input
CONTROL S (IN/OUT)
Variable/Fixed Audio (OUT)
Supplied Accessories
Visible Screen Size
Actual CRT Size
Speaker Output
Dimensions (W x H x D)
Mass
Power Consumption
Optional Accessories
82
FD Trinitron® tube
75 ohm external terminal for VHF/UHF
NTSC, American TV Standard
VHF
UHF
CATV
120V, 60 Hz
1 terminal, 3.3V T.M.D.S., 50 ohms
The DVI-HDTV input terminal is compliant with the EIA-861 standard and is
not intended for use with personal computers.
4 total (1 on front panel)
3 total (1 on front panel)
7 total (1 on front panel)
2 (Y, P
, P
)
B
R
1
1
Remote Control
AA (R6) Batteries
KV-32HS500
KV-36HS500
KV-32HS500
KV-36HS500
7.5 W x 2 + 15 W subwoofer
KV-32HS500
KV-36HS500
KV-32HS500
KV-36HS500
In Use
In Standby
Design and specifications are subject to change without notice.
❑
A/V Cable (VMC-810/820/830 HG)
❑
Audio Cable (RKC-515HG)
❑
Component Video Cable (VMC-10/30 HG)
❑
TV Stand, for KV-32HS500: SU-32HV1
TV Stand, for KV-36HS500: SU-36HV1
❑
Memory Stick media: 8 MB (MSA-8A); 16 MB (MSA-16A); 32
MB (MSA-32A); 64 MB (MSA-64A); 128 MB (MSA-128A)
2-13
14-69
1-125
1 Vp-p, 75 ohms unbalanced, sync negative
Y: 1 Vp-p, 75 ohms unbalanced, sync negative
C: 0.286 Vp-p (Burst signal), 75 ohms
500 mVrms (100% modulation)
Impedance: 47 kilohm
Y: 1.0 Vp-p, 75 ohms unbalanced, sync
negative; P
: 0.7 Vp-p, 75 ohms
B
P
: 0.7 Vp-p, 75 ohms
R
More than 408 mVrms at the maximum
volume setting (Variable)
More than 408 mVrms (Fixed)
Impedance (output): 2 kilohms
RM-Y186
2 supplied for remote control
32 in (812.8 mm) picture measured diagonally
36 in (914.4 mm) picture measured diagonally
34 in (863.6 mm) picture measured diagonally
38 in (965.2 mm) picture measured diagonally
898 x 689 x 608 mm
(35 3/8 x 27 1/8 x 24 in)
1017 x 760 x 643 mm
(40 x 30 x 25 3/8 in)
80 kg (176.5 lbs)
104.3 kg (230 lbs)
280 W
1 W