Sony KV-30XBR910 Operating Instructions Manual page 30

Notes on Using This Connection
To Do This ...
View (monitor) what is being
recorded
Set up the TV remote control
to operate the VCR(s)
Activate the TV remote
control to operate the VCR(s)
Control VCR functions with
the TV remote control
Label video inputs to easily
identify equipment connected
to the TV
Do This ...
Press TV/VIDEO repeatedly to select the VCR input (VIDEO 1 in the
illustration above).
If you have a non-Sony VCR, you must program the remote control. See
"Programming the Remote Control" on pages 47-48.
Open the outside cover, as shown on page 46. Then set the A/V slide switch
to the position you programmed for the VCR.
See "Operating a VCR" on page 58.
See the instructions for setting up Video Labels on page 90.
29