Advertisement
Quick Links
CLASSIC
CONVERSATION
CHAIR
I N ST R U C T I O N S
ASSEMBLY
STEP 1. Cut zip ties to remove spreader bar arms from leg
assembly. Use (4) 2" screws to attach left and right spreader
bar arms to foot rest and spreader bar.
LEFT SPREADER
BAR ARM
RIGHT SPREADER
BAR ARM
2"
SCREW
HARDWARE PACK
Hardware Pack Weight: 11.9 oz.
CHAIR PARTS
• CHAIR BACK
• CHAIR SEAT
• LEFT ARM/LEFT LEG ASSEMBLY
• RIGHT ARM/RIGHT LEG ASSEMBLY
• FRONT SPREADER BAR
• REAR SPREADER BAR
• LEFT SPREADER BAR ARM
• RIGHT SPREADER BAR ARM
SUGGESTED TOOLS
• RUBBER MALLET
• KNIFE OR SCISSORS
• PHILLIPS HEAD SCREWDRIVER
• DRILL
(2) 1.5" BARREL BOLTS
(14) 2" BARREL BOLTS
(16) BARREL NUTS
(6) 2" SCREWS
(2) PEGS
(1) ALLEN WRENCH
(1) SQUARE-HEAD BIT
Advertisement
Related Manuals for Nags Head Hammocks Classic Conversation Chair
Summary of Contents for Nags Head Hammocks Classic Conversation Chair
- Page 1 HARDWARE PACK Hardware Pack Weight: 11.9 oz. (2) 1.5” BARREL BOLTS CLASSIC (14) 2” BARREL BOLTS CONVERSATION CHAIR I N ST R U C T I O N S (16) BARREL NUTS (6) 2” SCREWS (2) PEGS ASSEMBLY (1) ALLEN WRENCH STEP 1.
- Page 2 BARREL BARREL NUT STEP 4. Use (2) 2” screws to attach chair back to chair seat. Tighten Congratulations on purchasing this Classic Conversation Chair. QUESTIONS REGARDING THIS PRODUCT? Call our customer service team, 800.643.3522. all bolts once screws are in.