Table of Contents
Advertisement
Equipment Use and Care
• Do not force equipment. Use the correct equipment
for your application. The correct equipment does the
job better and more safely.
• Do not use equipment if the power switch does
not turn it on and off. Any equipment that cannot
be controlled with the power switch is dangerous and
must be repaired.
• Disconnect the plug from the power source and/or
the battery pack from the equipment before mak-
ing adjustments, changing accessories, or stor-
ing. Preventive safety measures reduce the risk of in-
jury.
• Store idle equipment out of the reach of chil-
dren and do not allow persons unfamiliar with
the equipment or these instructions to operate
the equipment. Equipment can be dangerous in the
hands of untrained users.
• Maintain equipment. Check for misalignment or
binding of moving parts, missing parts, breakage of
parts, and any other condition that may affect the
equipment's operation. If damaged, have the equip-
ment repaired before use. Many accidents are caused
by poorly maintained equipment.
• Do not overreach. Keep proper footing and balance
at all times. This enables better control of the equip-
ment in unexpected situations.
• Use the equipment and accessories in accor-
dance with these instructions, taking into account
the working conditions and the work to be per-
formed. Use of the equipment for operations differ-
ent from those intended can result in hazardous sit-
uations.
• Use only accessories that are recommended by
the manufacturer for your equipment. Accessories
that may be suitable for one piece of equipment may
become hazardous when used with other equipment.
• Keep handles dry, clean, and free from oil and
grease. Clean handles give better control of the
equipment.
• Carrying the system incorrectly can cause the
monitor's docking handle to disengage from the
docking system and may result in property dam-
age and/or serious injury. Do not carry the Compact
M40 by the monitor's docking handle or its front han-
dle.
Pre-Operation Inspection
WARNING
To reduce the risk of serious injury from electrical
shock or other causes, and to prevent damage to
your equipment, inspect all equipment and correct
any problems before each use.
To inspect all equipment, follow these steps:
1. Power off your equipment.
2. Disconnect and inspect all cords, cables, and con-
nectors for damage or modification.
3. Clean any dirt, oil, or other contamination from your
equipment to ease inspection and to prevent it from
slipping from your grip during transport or use.
4. Inspect your equipment for any broken, worn, miss-
ing, misaligned, or binding parts, or any other con-
dition which might prevent safe, normal operation.
5. Refer to the instructions for all other equipment to in-
spect and make sure it is in good, usable condition.
6. Check your work area for the following:
• Adequate lighting.
• The presence of flammable liquids, vapors, or
dust that may ignite. If present, do not work in
area until sources have been identified and cor-
rected. The equipment is not explosion proof.
Electrical connections can cause sparks.
• A clear, level, stable, and dry place for the oper-
ator. Do not use the equipment while standing
in water.
7. Examine the job to be done and determine the cor-
rect equipment for the task.
8. Observe the work area and erect barriers as neces-
sary to keep bystanders away.
See additional product specific safety information
and warnings starting on page 8.
Compact M40 – English – 5
Advertisement
Table of Contents
