Bluetooth; Note On Bluetooth Connections; Bluetooth ® Pairing - Canon Rayo S1 User Manual

Bluetooth

®
Note on Bluetooth
• Bluetooth and Projector mode cannot be used together.
• During a Bluetooth connection, the quality of connection can vary depending on
the connected device or environment.
• The wireless equipment can experience electromagnetic interference and any
services related to personal safety cannot be provided.
• The company is not responsible for any problems resulting from loss, blocking, or
misuse of data transmitted or received by using the Bluetooth function.
• You must make sure to check that the connecting device is trustworthy and
verified for security before transmitting or receiving data. If there is an interfering
object between devices that transmits and receives data, the effective network
connectivity range can decrease.
• It may be incompatible with some devices, including devices not certified by
Bluetooth SIG (Special Interest Group).
• Do not use the Bluetooth function for illegal activities (illegal copying, air
transmission, or transmission for profits and etc.). The company is not liable for
any problems resulting from these actions.
Bluetooth ® pairing
1.
Slide the power switch to the left to put Bluetooth in waiting mode. A beep
will sound.
Note
• For more information on how to turn on Bluetooth mode, see "Turning on in Bluetooth
Mode" on page 13.
• When Bluetooth connection is in waiting mode, the blue lamp on top of the main body
will blink fast.
2.
When a Bluetooth connection is successful, a sound will emit and the blue lamp
on top of the main body will light up.
Note
• To disconnect Bluetooth or stop use, slide the power switch to the center and power off.
• If the device was once paired with this projector, it will connect automatically.
Connections
®
®
19
Rayo S1
User Manual