Clearance Requirement; Alcove Or Closet Installations; Minimum Clearance For Stable Operation; Side By Side Installation - Samsung WA50R5200A Series User Manual

Installation

Clearance requirement

This clearance requirement is applicable for washers only.
NOTE
• For the dryer's clearance requirement, see the dryer's user manual.
• If the washer and dryer have different clearance requirements, use the one with the
larger value.

Alcove or closet installations

Minimum clearance for stable operation:

Sides
1 in. / 25 mm
If both the washer and a dryer are installed in the same location, the front of the alcove
or closet must have two unobstructed air openings for a combined minimum total area of
72 in.² (465 cm²).
This clearance requirement is applicable for washer and dryer pair installation.

Side by side installation

A
A
B
C
D
18 English
Untitled-3 18
Top Rear
21 in. / 533 mm 5.9 in. / 150 mm
A
1 in. (25 mm)
21 in. (533 mm)
1 in. (25 mm)
5.9 in. (150 mm)
Front
1 in. / 25 mm
B
C D
2019-04-26 PM 12:09:37