Ez Setup; Ez Setup During The First Power On - Sharp AQUOS LC-15E1U Operation Manual

EZ SETUP
• When you turn on the TV for the first time, it will automatically
memorize the broadcasting channels.
Please perform the following instructions before you press MAIN
POWER.
(1) Insert the batteries into the remote control. (See page 8.)
(2) Connect the antenna cable to the TV set. (See page 10.)
(3) Connect the AC adapter to the DC input terminal of the product
and plug in the AC cord to the wall outlet. (See page 9.)
SElECT:~
ENTER:@
CONNECT ANTENNA OR CABLE.
START EZ SETUP?
EXIT:.
EXIT:.
NO:~
YES:@
SElECT LANGUAGE
[1J
ENGL I SH
ESPANOL
FRANCAI S
The tuner will automatically search
for the broadcasting and cable TV
channels. (The CH No. will
automatically increase when it
appears.)
If you want to stop the EZ SETUP
process once it has started, press
~
and it will be canceled. If you
want to SET UP again, please refer
to pages 27 and 28 on SET UP.
To cancel EZ SETUP
1
Press MAIN POWER, located on
the upper side of the main unit, to
turn on the TV. The SELECT
LANGUAGE mode will be dis-
played.
2
Press
./T
to select "ENGLISH",
"ESPANOL (SPANISH)" or
:'FRANCAIS (FRENCH)".
3
Press
~/~
to access EZ SETUP
mode.
4
Press
~
MAIN POWER
GJ0CD
GJCD0
0 0 0
@§)(QJ@
Control section of main unit
Press
~
PLEASE WAIT
AUTO PROGRAMMI NG
SHARP
STOP:@
5
Once EZ SETUP is completed, the
lowest channel number memorized
will be displayed.
I
I
NOTE
>
• Do not let the EZ SETUP screen display unattended for a long time.
• If EZ SETUP does not memorize all the channels in your region, please refer to pages 27 and 28 for more
information on manually memorizing the channels using CHANNEL SETTING.
• It may be difficult to PRESET when the broadcasting signals are weak, the channel cycle frequency is incorrect or
the frequency jamming is occuring around the area. Please refer to pages 27 and 28 for more information on
manually memorizing channels using CHANNEL SETTING.