Advertisement
Quick Links
351 New Whitfield Street • Guilford, CT 06437 USA • Tel (203) 458-3163 • Fax (203) 458-9291
About your
new Navtec System 50
Hydraulic Control Panel.
Congratulations on the purchase
of your new System 50, by Navtec.
Navtec Hydraulic Systems are an industry standard and have
been for more than a decade. The System 50 you've
purchased represents the ongoing ergonomic and mechan-
ical design program Navtec has initiated to address the
changing needs of modern yachts and the people who
sail them.
System 50 is designed for improved functioning at all levels
– operational, mechanical, and ergonomic. It also is
designed to accommodate a two-speed auto-pump or
a hydraulic power pack. The end result is an advanced,
flexible, intelligently designed hydraulic control system for
yachts 35 to 70 feet long.
w w w. n a v t e c . n e t
i n f o @ n a v t e c . n e t
Advertisement
Summary of Contents for Navtec System 50
- Page 1 System 50, by Navtec. Navtec Hydraulic Systems are an industry standard and have been for more than a decade. The System 50 you’ve purchased represents the ongoing ergonomic and mechan- ical design program Navtec has initiated to address the changing needs of modern yachts and the people who sail them.
-
Page 2: Installation Instructions
Navtec distributor or Navtec Inc. for plumbing instructions. For the System 50 with a two speed pump you have two returns to the reservoir. One from the manifold #2, the second from the pump #6. You will need a “t” fitting. (not included) Information and advice on oil and filter. -
Page 3: Operating Instructions
5.75 146.1 Pressurizing the cylinder. Standard Navtec cylinders are equipped with an air pressure return. This return is pressurized through the ‘tire’ valve at the clevis end of the cylinder. A bicycle pump or service station air hose can be used to charge the return up to 100 psi. The air pressure should be adjusted to give the desired rate of return. - Page 4 NAVTEC LIMITED WARRANTY 1. WARRANTY: Navtec warrants its products, in normal usage, to be free of defects in materials and workmanship for a period of one year from date of original purchase by the user, subject to the conditions and limitations below.