Demonstration Mode; Displaying Hob Data - Miele KM 7201 FR Operating And Installation Instructions

Demonstration mode

This function enables the hob to be
demonstrated in showrooms without
heating up.
Activating/deactivating
demonstration mode
 Switch the hob on.
 Touch and hold the 0 and 2 sensor
controls on the numerical keybank at
the same time for 6 seconds.
In the timer display,  flashes
alternately with  (demonstration mode
activated) or  (demonstration mode
deactivated) for a few seconds.
Additional functions

Displaying hob data

The model number and software
version of the hob can be displayed.
There must not be any pots or pans on
the hob.
Model number/Serial number
 Switch the hob on.
 Touch and hold the 0 and 4 sensor
controls on the numerical keybank at
the same time for 6 seconds.
Numbers will appear, one after the
other, in the timer display separated by
a dash.
Example:   (Model number
KM 1234) –      (Serial
number)
Software version
 Switch the hob on.
 Touch and hold the 0 and 3 sensor
controls on the numerical keybank at
the same time for 6 seconds.
Numbers will flash on and off, one after
the other, in the timer display:
Example:  flashing alternately with  =
Software version 123
39