To Charge The Battery; Turning On The Phone - Sony Ericsson K608i User Manual

Sony cell phone user's guide
Hide thumbs Also See for K608i:
Table of Contents

Advertisement

Getting started

To charge the battery

≈ 2h.
1
Connect the charger to the phone. The symbol
on the charger plug must face upwards.
2
It may take up to 30 minutes before the battery
icon appears on the screen.
3
It takes approximately 2 hours until the battery
icon indicates that the battery is fully charged.
If you do not see the battery icon after this
time, press a key to activate the screen.
4
Remove the charger by tilting the plug upwards.
6
This is the Internet version of the user's guide. © Print only for private use.
PIN (Personal Identification Number)
You may need a PIN (Personal Identification
Number) to activate the services in your phone.
The PIN is associated with your SIM card, and
not with the phone. Your PIN is provided by your
network operator. When you enter your PIN, each
≈ 30 min.
digit appears as *, unless your PIN starts with the
same digits as an emergency number, for example
112. This is so that you can see and call an
emergency number without entering a PIN.
If you make a mistake while entering your PIN,
delete the number by pressing
If you enter the wrong PIN three times in a row,
the SIM card is blocked and the message PIN blocked
appears. To unblock it, you need to enter your PUK
(Personal Unblocking Key),

Turning on the phone

and making calls
Make sure that the phone is charged and your
SIM card is inserted before you turn it on.
When you have turned the phone on, you can use
the setup wizard to quickly and easily prepare your
phone for use.
.
%
.
76 SIM card lock

Advertisement

Table of Contents
loading

Table of Contents