To Start/Stop Recording In Sync With The Sound Source (Synchro-Recording) - Sony Walkman MZ-N910 Operating Instructions Manual

On the remote control
1
Press DISPLAY.
Each time you press the button, the
display changes as follows.
Display window on the remote control
D
Display: D/E
D
Track number
Track number
Numbers of
tracks in the
group
Numbers of
tracks in the
disc
Track number
Track number
—
Note
Depending on the group settings, the operating
conditions, and the disc settings, you may not
be able to select certain indications or the
indications may appear differently.
z
If you want to check the playing position or
track name while playing, see "Viewing various
information" (page 32).
26
E
E
Elapsed time
Track name
Group name
Disc name
Disc name
Indication of the
selected sound mode
Current time
To start/stop recording
in sync with the sound
source
(Synchro-recording)
During synchro-recording, the starting
and stopping of recording occurs are
synchronized with the sound source. This
simplifies digital recordings (e.g., from a
CD player) since the need to operate the
recorder or the sound source is
eliminated. Synchro-recording is only
possible with the optical cable connected.
Jog dial
REC
1
Make connections.
Use the appropriate optical cable to
suit the source equipment. For details,
see "Optional accessories" (page 75).
2
While the recorder is stopped, press
the jog dial.
3
Turn the jog dial until "REC SET"
appears in the display, and then press
the jog dial.
4
Turn the jog dial until "SYNC REC"
appears in the display, and then press
the jog dial.
5
Turn the jog dial until "SYNC ON"
appears in the display, and then press
the jog dial.
6
Press and slide REC.
"REC" and the REC LED on the
recorder light up in the display and
the recorder stands by for recording.