Philips 37PFL7422/79 Service Manual page 13

Step 5. Remove Front bezel ASSY as Fig.9~10.
Remove the 32 screws as Fig.9.
4. Mechanical Instructions
Fig.7
Notes: Please add insulation material between board and panel to
4.2 Set Re-assembly
Fig.8
To re-assemble the whole set, execute all processes in reverse
order.
Notes:
a. While re-assembling, make sure that all cables are placed
and connected in their original position.
b. Pay special attention not to damage the EMC foams at the
SSB shielding. Check that EMC foams are put correctly on
their places.
In warranty, it is not allowed to disassembly the LCD panel, even the
backlight unit defect.
Out of warranty, the replacment of backlight unit is a correct way
when the defect is cused by backlight (CCFL,Lamp).
Fig.9
Fig.10
Insulation material
Service position
avoid short ciucuit.
13
TPT1.2A LA
Fig.11