Detailed Description Of Commands; Command Name (Operation Of Command) [Supported Modes] - Epson S5U1C17001C Manual

Classification
File loading file
load
Trace
c17 tm
Other set output-radix
set logging
source
target
detach
pwd
cd
c17 ttbr
c17 cpu
c17 chgclkmd
c17 pwul
c17 help
c17 model_path
c17 model
c17 flv
c17 flvs
c17 stdin
c17 stdout
c17 lcdsim
quit
Supported modes: ○= Can be used, – = Cannot be used.
* The GNU17V3 does not support commands other than those shown above.
8.5.2

Detailed Description of Commands

This chapter describes in detail each debugger command using the format shown below.
Command name
A detailed description of each command begins with the command name in this format.
[Supported modes] shows such modes as [ICD Mini / SIM] in which the command can be used. You cannot use the command in
modes other than those written here.
Basically, each command is described separately. However, two or more commands (belonging to the same operation group) that
differ only slightly or which can be better understood when explained together are described collectively.
Operation
Explains the operation of the command.
Format
Shows the format in which the command is entered at the command prompt and the specifics of the parameters. Parameters
enclosed in brackets [ ] can be omitted. Otherwise, no parameters can be omitted. The italicized characters denote parameters
specified with numeric values or symbols.
Usage example
Shows an example of how to enter the command and the results of command execution, etc.
Notes
Describes limitations on use of the command or precautions to be taken when using the command.
Some commands have additional items other than those described above when needed for explanatory purposes.
S5U1C17001C Manual
(Rev. 1.0)
Command
Load debugging information
Load program
Set trace mode
Change variable display format
Log output setting
Execute command file
Connect target
Disconnect target
Display current directory
Change current directory
Set TTBR
Set CPU type
DCLK change mode
Unlock flash security password
Help
Model-specific information file directory setting
MCU model name setting
Flash programming power setting
Flash programming power setting cancellation
Input of data using input/output functions
Output of data using input/output functions
LCD panel simulator setting
Quit debugger
(operation of command)
Seiko Epson Corporation
Operation
8 Debugger
Supported modes
SIM
ICD Mini
○ ○
○ ○
－ ○
○ ○
○ ○
○ ○
○ ○
○ ○
○ ○
○ ○
— ○
— ○
○ －
○ －
○ ○
○ ○
○ ○
○ －
○ －
○ ○
○ ○
○ －
○ ○
[Supported modes]
8-10