Boot Rom Memory Test; Boot Rom Test - HP 200 Series Hardware Support Document

Hide thumbs Also See for 200 Series:
Table of Contents

Advertisement

Troubleshooting and Diagnostics 63
Boot ROM Memory Test
The boot ROM is located on the processor board. The assembly involved is:
09817-69.511 Processor board
This is an exchange board.
Boot ROM Test
The boot Read-Only Memory (ROM) test performs a checksum on the boot ROM. While it is
running, the LEOs display 0000 0011, and the CRT displays the message
"BOOTROM X. Y"
where X. Y is the boot ROM version.
If the boot ROM test fails, the following LED display and CRT message are presented:
LED Display
CRT Message
1000 0011
"BOOTROM X.V
FAILED"
Probable Cause
Defective Boot ROM
What to Do
Replace Processor Board

Advertisement

Table of Contents
loading

This manual is also suitable for:

9000 series217

Table of Contents