Heating Mode; Setting The Timer; Fan Mode - DeLonghi PAC AN HPE Series Instructions For Use Manual

HEATING MODE

This is ideal in spring and autumn when outdoor temperatures
are not particularly severe.
For this mode, the appliance should be prepared in the same
way as for air conditioning, with the air exhaust hose attached to
enable the moisture to be discharged outside.
°F
14 • Select the required fan
High speed: to achieve the target temperature as rapidly
as possible
Medium speed: reduces noise levels but still maintains a
good level of comfort
Low speed: for silent operation
With particular room conditions (e.g. low temperature or high
temperature), the appliance will automatically select the opera-
ting fan speed however, If the unit is cold, it will automatically per-
form a pre-heating cycle. It can take several minutes and fan will
not operate until pre-heating cycle is over. In this mode, the fan
may operate for short periods, even though the set temperature
has already been reached.

FAN MODE

When using the appliance in this mode, the air exhaust hose
does not need to be attached.
To set this function correctly:
• Press the MODE button (B2) a number of times until the fan
symbol appears.
• Select the required fan speed by pressing the
(B5).
°F
High speed: for maximum fan power (fig. 15);
°F
17
To set this function correctly:
• Press the MODE button a
number of times until the
heating symbol
(fig. 14).
speed by pressing the
button (B5).
°F
15
Medium speed: reduces
noise levels but still maintains a
good level of comfort (fig. 16);
Low speed: for silent
operation (fig. 17).
To change the unit of measurement for the displayed temperature,
press the and

SETTING THE TIMER

The timer can be used to delay when the appliance comes on or
goes off. This avoids wasting electricity by optimising operating
periods.
How to programme delayed start up
appears
• Use the
of hours delay before the appliance comes on. They increase
or decrease the time in steps of an hour.
The appliance can be set to come on within the next 24 hours.
Five seconds after the timer has been set, the display dims and
the setting is memorised.
After setting, the operating mode and fan speed can be modified.
To cancel the timer programme, press the timer button (B4)
again. Pressing the ON/OFF button (B1) cancels the timer pro-
gramme and the air conditioner comes on immediately in the
selected mode.
How to programme delay OFF
button
• Use the
of hours delay before the appliance goes off.
They increase or decrease the time in steps of an hour.
The appliance can be set to go off within the next 24 hours.
Five seconds after the timer has been set, the operating mode is
displayed and the timer symbol remains on.
16
At the set time, the air conditioner goes off and remains in
stand-by.
To cancel the timer programme, press the timer button (B4)
again. The timer symbol goes off.
After setting, the operating mode and fan speed can be modified.
9
buttons together for 3 seconds.
• Plug the appliance into an
electrical receptacle. It will
be in STAND-BY.
• Press the timer button (B4).
The timer symbol (B16)
comes on (fig. 18).
18
(B6) or (B3) buttons to set the number
• Delay OFF can be pro-
grammed in any operating
mode - air conditioning/fan/
dehumidifying.
°F
• Press the timer button (B4).
The timer on symbol (B16)
19
comes on (fig. 19).
(B6) or (B3) buttons to set the number