Advertisement
E
xt
1.
tor
2.
3.
4.
he
er
ce
If you're still having trouble connecting the ADT Motion
s
Detector, please visit SmartThings.com/Support-ADT for
assistance.
Troubleshooting
If the detector did not pair successfully with the ADT
Security Hub, follow these instructions to reset it:
Press and release the Tamper Switch on the
detector twice.
Press and hold the Tamper Switch. The red LED will
begin to blink quickly, and after a short period of time
will stay on.
Release the Tamper Switch and after 5 seconds the
red LED will begin to blink slowly.
Use the SmartThings app to complete setup.
Tamper Switch
Advertisement
