The Headphone Amplifier .............6 Specifications ................7 Warranty ...............Back cover Thank you for purchasing the Radial DiNET DAN-RX2. The DAN-RX2 is a high-resolution digital-to-analog converter that is designed to connect to a Dante or AES67-enabled Ethernet network — seamlessly transferring the audio stream to a pair of balanced audio outputs to feed a PA, recording device or broadcast mixing console.
True to the Music ® OVERVIEW The Radial DiNET DAN-RX2 is a professional grade digital-to-analog audio converter designed specifically for use with Dante or AES67- enabled networks. It allows you to create a stereo audio endpoint at any location within a Dante network, featuring an Ethernet connector to receive the digital signal, and balanced analog outputs to feed mixing consoles, power amplifiers, or self-powered speakers.
Switches to green LED once Dante processor becomes active. +15V LED: Illuminates when the DAN-RX2 is receiving power via the included DC power adapter. POE LED: Illuminates when the DAN-RX2 is receiving Power over Ethernet (PoE). Radial Engineering Ltd. DAN-RX2...
Page 5
Output level is controlled by the audio playback source. 13. GROUND LIFT: Lifts pin-1 on both XLR outputs to eliminate hum and buzz from ground loops. 14. NON SLIP PAD: Provides electrical & mechanical isolation and keeps the unit from sliding around. Radial Engineering Ltd. DAN-RX2...
The DAN-RX2 connects to an Ethernet switch using a standard CAT5e or CAT6 cable. Once the Ethernet switch is connected to a computer running the Dante Controller software, the DAN-RX2 will appear as an available receive device. Dante Network Radial Engineering Ltd. DAN-RX2...
The DAN-RX2 can be mounted in standard 19” equipment racks using the optional SA Series Rack Adaptor kit (Part # R800 9422). This 1 RU adaptor allows you to mount one or two DAN-RX2 receivers in a single rack space. Radial Engineering Ltd. DAN-RX2...
Please be aware of the recommended exposure limits within your jurisdiction and follow them closely. The user agrees that Radial Engineering Ltd is not liable for any health effects resulting from the use of this product and the user clearly understands that he or she is entirely responsible for the safe and proper use of this product.
Operation of this device in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at their own expense. * Subject to change without notice. Radial Engineering Ltd. DAN-RX2...
Page 10
THREE YEAR TRANSFERABLE LIMITED WARRANTY RADIAL ENGINEERING LTD. (“Radial”) warrants this product to be free from defects in material and workmanship and will remedy any such defects free of charge according to the terms of this warranty. Radial will repair or replace (at its option) any defective component(s) of this product (excluding finish and wear and tear on components under normal use) for a period of three (3) years from the original date of purchase.