Advertisement
Quick Links
WARRANTY INFORMATION
2-YEAR
KING CANADA TOOLS
LIMITED WARRANTY
OFFERS A 2-YEAR LIMITED WARRANTY
FOR THIS WORKSTATION
FOR NON-COMMERCIAL USE.
PROOF OF PURCHASE
PORTABLE CLAMPING
Please keep your dated proof of purchase for warranty and servicing purposes.
WORKSTATION
LIMITED TOOL WARRANTY
King Canada makes every effort to ensure that this product meets high quality and
durability standards. King Canada warrants to the original retail consumer a 2-year
limited warranty as of the date the product was purchased at retail and that each
product is free from defects in materials. Warranty does not apply to defects due
directly or indirectly to misuse, abuse, normal wear and tear, negligence or
accidents, repairs done by an unauthorized service center, alterations and lack of
maintenance. King Canada shall in no event be liable for death, injuries to persons
or property or for incidental, special or consequential damages arising from the use
of our products.
To take advantage of this limited warranty, return the product at your expense
together with your dated proof of purshase to an authorized King Canada service
center. Contact your retailer or visit our web site at www.kingcanada.com for an
updated listing of our authorized service centers. In cooperation with our authorized
serviced center, King Canada will either repair or replace the product if any part or
parts covered under this warranty which examination proves to be defective in
workmanship or material during the warranty period.
NOTE TO USER
This instruction manual is meant to serve as a guide only. Specifications and
references are subject to change without prior notice.
PARTS DIAGRAM & PARTS LISTS
Refer to the Parts section of the King Canada web site for the most updated parts
diagram and parts list.
KING CANADA INC. DORVAL, QUÉBEC, CANADA H9P 2Y4
MODEL: K-2800
www.kingcanada.com
INSTRUCTION MANUAL
COPYRIGHT © 2011 ALL RIGHTS RESERVED BY KING CANADA TOOLS INC.
Advertisement
Related Manuals for King Canada K-2800
Summary of Contents for King Canada K-2800
-
Page 1: Warranty Information
PARTS DIAGRAM & PARTS LISTS Refer to the Parts section of the King Canada web site for the most updated parts diagram and parts list. KING CANADA INC. DORVAL, QUÉBEC, CANADA H9P 2Y4 MODEL: K-2800 www.kingcanada.com... - Page 2 3. Make sure the workstation folding legs are properly secured with leg lock knobs. 4. Only use this workstation on a level surface. Model ........................K-2800 Maximum clamping width ....................38” 5. Do not use this workstation as a standing platform, step ladder or scaffolding support.
- Page 3 SETTING UP WORKSTATION OPERATION Clamping a Workpiece UNPACKING Warning! Read all safety rules before using this Carefully remove the workstation from the box. Position the top of the workstation down on portable workstation. If for any reason the workpiece the floor with folded legs facing upwards. or the workstation moves during an operation, stop SETTING UP WORKSTATION immediately.
- Page 4 OPERATION & MAINTENANCE Clamping Wide Workpieces continued..3) Turn the sliding vise jaw (A) Fig.9 around and slide it back onto the tracks as shown. 4) Place your wide workpiece (A) Fig.10 between the fixed vise jaw and the sliding vise jaw with and equal amount of the workpiece on each side of the workstation.