McAfee WebShield e500 Installation Manual page 52

Installation Guide — English
4. Select the most appropriate usage profile (see
5. Click Apply all changes.
Configuring the ports used for the protocols
The appliance uses the following default ports for the protocols:
• E-mail (SMTP): 25
• File transfer (FTP): 21
• Web browsing (HTTP): 80
• Mail download (POP3): 110
If your organization's network uses different ports for the protocols, you must
adjust the appliance's port numbers accordingly.
To change the port used for a protocol:
1. Select the protocol's Configuration page in the navigation bar.
2. In the Port on which to listen... text box, type the required port number
3. Click Apply all changes.
ENG - 42
24).
The usage profiles do not mention the mail download (POP3) protocol
because it uses much less bandwidth than the other protocols. If you
have enabled scanning for the POP3 protocol, it is scanned regardless of
which profile you choose.
You can adjust any of the usage values (including the POP3 levels) in the
Configuration pages for the protocols. If you do this, the appliance
automatically selects User-selected values from the 'Configuration'
pages of each protocol in the System Profiles page.
The web browser sends your changes to the appliance.
(see "Protocols" on page
The web browser sends your changes to the appliance.
"Scanning profile" on page
24).
McAfee WebShield e500 Appliance version 2.5