Sony CDX-C910 Operating Instructions Manual page 7

Playing the stored programme
You can select:
• PGM 1 to play Programme 1.
• PGM 2 to play Programme 2.
• PGM 1+2 to play Programmes 1 and 2.
1
Press (SHIFT).
2
Press (3) (P.MODE) repeatedly until
"PGM" appears.
3
Press (4) (n) repeatedly until the
desired programme appears.
Programme Play starts.
Programme 1 playback
CD
PGM 1
EQ SUR
µ
Programme 2 playback
CD
PGM 2
EQ SUR
µ
Programmes 1 and 2 playback
CD
PGM 1+2
EQ SUR
µ
Normal playback
CD
PGM off
EQ SUR
4
Press (SHIFT).
To go back to the normal playback mode,
select "PGM off" in step 3 above.
Note
"NO Data" appears in the display if no track is stored in
the programme.
Actual total number:
Erasing the entire programme
1
Press (SHIFT), then press (3) (P.MODE)
for two seconds.
2
Press (1) (N) repeatedly until "DEL"
appears.
To delete Programme 2, press (4) (n)
repeatedly until "PGM 2" appears.
3
Press (5) (ENTER) for two seconds.
PGM1
The entire programme is erased.
4
When you finish erasing programmes,
press (3) (P.MODE) for two seconds.
PGM 2
Adding tracks to the programme
1
Press (SHIFT), then press (3) (P.MODE)
for two seconds.
To select Programme 2, press (4) (n)
+
PGM1 2
repeatedly until "P 2" appears.
2
Press (1) (N) or (4) (n) to select the
track slot number where you want to
insert a track.
3
Press either side of (SEEK/AMS) to select
the track you want to insert.
4
Press (5) (ENTER) momentarily to enter
the track.
The current track in that slot number and
the succeeding tracks shift down.
To continue inserting tracks, repeat steps 2
through 4.
Note
Once all 12 slots have been filled, "*Mem full*"
appears in the display, and you cannot insert tracks.
5
When you finish inserting tracks, press
(3) (P.MODE) for two seconds.
Sony CDX-C910 (E,S,C) 3-856-715-11 (2)
DEL PGM edit
EQ SUR --PGM1--
P1 PGM edit
NO Data
EQ SUR
CD PGM edit
2 P1.‚2
EQ SUR
TRACK
Track slot number
EN
7