Sony CDX-C810DSP Operating Instructions Manual page 7

3
Press (4) (n) repeatedly until the
desired programme appears.
Programme 1 playback
C D
PGM 1
SUR EQ
PLAY MODE
µ
Programme 2 playback
C D
PGM 2
SUR EQ
PLAY MODE
µ
Programmes 1 and 2 playback
C D
PGM 1+2
SUR EQ
PLAY MODE
µ
Normal playback
C D
PGM OFF
SUR EQ
PLAY MODE
Programme Play starts.
To go back to the normal playback mode,
select "PGM OFF" in step 3 above.
Note
"NO Data" appears in the display if no track is stored in
the programme.
Erasing the entire programme
1
Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
C D
TRACK
7 P1.‚8
SUR EQ
PLAY MODE ENTER
"P 1" shows Programme 1 is selected.
2
Press (1) (N) repeatedly until "DEL"
appears.
D E L
--PGM1--
SUR EQ
PLAY MODE ENTER
To delete Programme 2, press (4) (n)
repeatedly until "PGM 2" appears.
3
Press (5) (ENTER) for two seconds.
P 1
NO Data
SUR EQ
PLAY MODE ENTER
The entire programme is erased.
4
When you finish erasing programmes,
press (3) (PLAY MODE) for two seconds.
Actual total number:
Adding tracks to the programme
1
PGM
1
PGM
2
2
PGM
1 + 2
3
4
5
Sony CDX-C810DSP (
Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
C D
TRACK
4 P1.‚3
SUR EQ
PLAY MODE ENTER
"P 1 " shows Programme 1 is selected.
To select Programme 2, press (4) (n)
repeatedly until "P 2" appears.
Press (1) (N) or (4) (n) to select the
track slot number where you want to
insert a track.
Track slot number
C D
TRACK
2 P1.‚2
SUR EQ
PLAY MODE ENTER
Press either side of (SEEK/AMS) to select
the track you want to insert.
Press (5) (ENTER) momentarily to enter
the track.
The current track in that slot number and
the succeeding tracks shift down.
To continue inserting tracks, repeat steps 2
through 4.
Note
Once all 12 slots have been filled, "*Mem Full*"
appears in the display, and you cannot insert tracks.
When you finish inserting tracks, press
(3) (PLAY MODE) for two seconds.
continue to next page n
E
,F,G,I) 3-856-118-11(2)
EN
7