Sony CDX-C760 Primary Operating Instructions Manual page 18

Erasing an entire program
1
Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
C D 2
DISC
4
SUR EQ
PLAY MODE
"P 1" shows Program 1 is selected.
If you have labelled the disc, the bank edit
mode appears. Press (3) (PLAY MODE) to
display "P 1" above.
2
Press (1) (N) repeatedly until "DEL"
appears.
D E L
SUR EQ
PLAY MODE
To erase Program 2, press (4) (n)
repeatedly until "PGM 2" appears.
3
Press (5) (ENTER) for two seconds.
P 1
EN
SUR EQ
PLAY MODE
The entire program is erased.
4
When you finish erasing programs, press
(3) (PLAY MODE) for two seconds.
5
Press (SHIFT).
Adding tracks to a program
1
Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
C D 2
DISC
4
SUR EQ
PLAY MODE
"P 1" shows Program 1 is selected.
If you have labelled the disc, the bank edit
mode appears. Press (3) (PLAY MODE) to
display "P 1" above.
To select Program 2, press (4) (n)
repeatedly until "P 2" appears.
2
Press (1) (N) or (4) (n) to select the
track slot number where you want to
insert a track.
C D 2
DISC
3
SUR EQ
PLAY MODE
3
Press either side of (SEEK/AMS) to select
the track you want to insert.
18
TRACK
7 P1.‚8
ENTER
--PGM1--
ENTER
NO Data
ENTER
TRACK
7 P1.‚8
ENTER
Track slot number
TRACK
2 P1.‚5
ENTER
4
Press (5) (ENTER) momentarily to enter
the track.
The current track in that slot number and
the succeeding tracks shift down.
To continue inserting tracks, repeat steps 2
through 4.
Note
Once all 12 slots have been filled, "*Mem Full*"
appears in the display, and you cannot insert tracks.
5
When you finish inserting tracks, press
(3) (PLAY MODE) for two seconds.
6
Press (SHIFT).
Erasing tracks in a program
1
Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
C D 2
DISC TRACK
3 2 P1.‚7
SUR EQ
PLAY MODE ENTER
"P 1" shows Program 1 is selected.
If you have labelled the disc, the bank edit
mode appears. Press (3) (PLAY MODE) to
display "P 1" above.
To select Program 2, press (4) (n)
repeatedly until "P 2" appears.
2
Press (1) (N) or (4) (n) to select the
track you want to erase.
Track slot number
C D 2
DISC TRACK
3 3 P1.‚6
SUR EQ
PLAY MODE ENTER
The track currently registered in slot 6 of
Program 1.
3
Press (5) (ENTER) for two seconds.
When you erase a track from a slot number,
the succeeding tracks shift up to fill the gap.
D E L
DISC TRACK
- -- P1.‚6
SUR EQ
PLAY MODE ENTER
µ
C D 2
DISC TRACK
4 7 P1.‚6
SUR EQ
PLAY MODE ENTER
4
To continue erasing tracks, repeat steps
2 and 3.
5
When you finish erasing tracks, press (3)
(PLAY MODE) for two seconds.
6
Press (SHIFT).