Table of Contents
Advertisement
REMOTE CONTROL
The descriptions in this manual are based on the buttons of the remote control. Please read this manual carefully and
use the TSP510-M / TSP510-A set correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching
the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
CAUTION
•
Do not mix old and new batteries, as this may damage the remote control.
•
Make sure to point the remote control to the remote control sensor on the TSP510-M / TSP510-A set.
•
Some features of the remote control may not be supported in certain models.
•
The image may be different according to the model.
(POWER) Turns the TSP510-M / TSP510-A set on or off.
Selects the input mode.
Turn off the TSP510-M / TSP510-A and then turn
it back on.
Reduces power consumption by adjusting peak
screen brightness. (This model does not support this.)
Used for viewing 3D videos. (This model does not support this.)
Number and Alphabet buttons Enters numerical or alphabetical
characters depending upon the setting. (Depending upon the model, this
feature may not be supported.)
Toggles between numerical and alphabetical. (Depending upon the
model, this feature may not be supported.)
Deletes the entered numerical or alphabetical character.
(Depending upon the model, this feature may not be supported.)
Volume Up/Down Button Adjusts the volume. (This model does not
support this.)
Selects the Aspect Ratio mode.
Automatically adjusts picture position and minimizes image
instability (available for RGB input only). (This model does not support
this.)
Mutes all sounds. (This model does not support this.)
Adjust the brightness by pressing the Up and Down
buttons on the remote control. In USB mode, the OSD menu has the
PAGE function to move to the next file list.
and
ends to the label inside
21
Advertisement
Table of Contents
