Read And Write - Fluke 9000A-Z80QT Instruction Manual

Enter
the address you want to read, followed by
3.
The mainframe displays the
4.
read), and the pod
Quick-Looping write using the 9100 Series
start
To
follows:
Press the POD
1.
Press the QWK_WR softkey, followed by ENTER.
2.
Enter
the address desired, followed by the
3.
Enter
the
4.
The pod
5.
3-15. QUICK MEMORY TESTS
Quick Memory tests are controlled by software inside
software inside the mainframe. Quick Memory tests execute much faster
the corresponding
Quick RAM and Quick ROM functions
Series mainframes are presented separately after a description
Quick
3-16.
RAM
RAM
The Quick
than with the RAM
quickly
faster than
the RAM
is particularly well
RAM
The Quick
verification test.
pattern
normal
The
O
'
write check, while the second phase checks address decoding. The
read/
write check
read
/
bit of
each
low. After the
been written to each address.
reads each address and compares the read
is
expected.
in control
is
key.
data byte value in hex, followed by
now in control of the looping process.
is
tests built into the mainframe.
Description
Test
allows the operator to
Test
Short
test. The Quick RAM Test
Short test and
is
for
suited
programming applications.
available two variations: the
in
Test is
RAM test consists
is performed by writing and
to
each test address
check
read/write
contents of
the address (from the first
of
the looping process.
mainframe,
right-arrow
Instructions
of
the pod using the 9000 and 9100
test RAM address blocks more
almost as rigorous. The Quick RAM test
normal RAM
of
two phases: the
reading
that
there are no bits held high or
ensure
is unique
completed, a
For
the address decoding check, the pod
data
with the
Z8OQT
ENTER.
proceed
key.
ENTER.
the rather than
pod,
than
for using the
of
the tests.
is
considerably
test and a
first
test phase is
from
and a
l 0
a
bit pattern has
that
unique word
as
a
3-9